-
-
1大佬们有没有两相混合步进电机的Maxwell三维分析案例啊,网上找了好久都没找到,救救孩子吧
-
33
-
0
-
0
-
0
-
21做的是一个锥形电机的分析,一直是这两个问题反复出现,一个又一个地改,这两个问题无法处理。 1,source setup is incorrect.please make sure the sum of currents in each full winding must be zero in the both stationary moving region,respectively.the full winding is complete physical winding without being reduced by master/slave and symmetry boundary. 2,error in mesh mapping on band. 困扰一周要疯了,真心求助各位大佬
-
35
-
1Eddy effect settings may need revisiting due to the recent changes in the design. The default value will be used for the object if the value is not specified
-
0提取两根平行线缆的寄生参数
-
12QQ群:389233228 主要用于maxwell操作交流 会分析一些基础视频
-
0
-
1为什么水平的线圈和倾斜的线圈自感不一样的,用的同样步骤加激励,很疑惑,自感论将说是不变的,希望各位大神帮帮想一下
-
0大佬们,请问在Maxwell里面建立了一个模型,但输出转矩总是有正有负怎么办?输入电流和反电动势相位频率也调试过了,就是调试不正确
-
9
-
16
-
4maxwell变压器仿真中,激励湘潭,为什么在涡流场和瞬态场中仿真得出的电感矩阵不一样呢?
-
14
-
1
-
1maxwell里用涡流场进行仿真时,添加电流激励那一项里“value”指的是电流有效值还是最大值
-
1这个输入感觉很麻烦,有很多不懂的地方,麻烦有没有大佬指导一下
-
1
-
7
-
7
-
25
-
220231108 (E:/EDT/) Maxwell2DDesign1 (Transient, about Z) [warning] Maxwell2d solver, process solver2d: Internal Solver Warning: 'A wrapper object is required to contain all the moving objects in band for translation motion. The result will be wrong without the wrapper object.' (9:23:52 上午 11月 08, 2023) [info] Normal completion of simulation on server: Local Machine. (9:38:51 上午 11月 08, 2023) 警告报错不知如何解决,电磁直线发射的
-
0
-
5请大神帮我看一下,模型在solidworks中并没有干涉,导入进Maxwell中就显示,两个零件intersect,从新建模,系统还是提示那两个零件intersect
-
5
-
1maxwell仿真的过程中可不可以暂停,然后后面在接着仿真
-
6
-
28有没有哪位老哥《ansoft12在工程电磁场中的应用》这本书的光盘资料,最近在学习这个,不胜感激!
-
0maxwell做瞬态运动直线仿真时出现这个报错 Frocess ' 3dtds terminated abnormally. It may have run out of memory or could have been killed by the user. (6:09:15 T4 12A 09, 2023)Simulation completed with execution error on server: Local Machine. (6:09:16 T4 12A 09, 2023) 怎么解决呀(小白选手)
-
10Maxwell 中仿真出现 错误 Process “3dnms” terminated abnormally. it may have run out of memory or could have been killed by the 网页链接 completed with execution error on server:local machine.是什么原因。请大佬指点
-
5
-
3
-
12求大神,我用ansoft仿真运动小球的时候怎么总是显示error in mesh mapping on band怎么也修改不对……
-
3有大神能教教我怎么安装ansoft12吗,有偿也行
-
1跪求ansoft的安装包和安装方法
-
0ansoft Maxwell现在是被合并到ansys Maxwell里面去了吗,现在准备学ansoft,去b站搜全是ansys的,不知道是不是一样的现在开始学请问推荐什么教程呀
-
3
-
0
-
15time step at 0.0025 sec completed, process solver2d error: Internal Solver Error: 'Could not find the face: for translation motion and non-cylindrical rotation, the moving part must have a big object which contains all other objects, please check the model setup!
-
1
-
0各位泰山,各位杰青,maxwell的3d瞬态仿真内部网格和外部网格可以对同一个3维物体操作吗(一个物体内部外部都划分网格),诚心求教
-
2